UPTPIG-30 Fuel, Startup and Pulsed Gas Treatment Station

Application

A fuel, startup and pulsed gas treatment station with the capacity of 30,000 Nm3/h is designed to:
− to purify natural and associated petroleum gas from mechanical impurities and condensed moisture;
− to heat gas and to maintain gas temperature at the outlet at the specified range but not less;
− to reduce gas pressure (to decrease inlet pressure to the set value at the outlet and its automatic maintenance);
− to measure gas flow;
− to odorize gas.

Basic technical data and characteristics

UPTPIG-30 “Goluboye Plamya” is a skid-mounted facility with process equipment that are installed inside it. The fuel, startup and pulsed gas treatment station consists of the following units:

UPTPIG-30 “Goluboye Plamya” is installed outdoors in macroclimatic areas with moderate climate (N) and the 1st environmental class according to GOST 15150.

Designed snow load of 120 kgf/m2 complies with the requirements of the 2nd territorial region. Wind load of 38 kgf/m2 complies with the requirements of the 3rd territorial region according to the Construction Standards SNiP 2.01.07-85.

Basic working parameters of UPTPIG-30 “Goluboye Plamya”

Name of parameter Value
Maximum working gas pressure at the inlet, MPa 9,81
Minimum working pressure at the inlet, MPa 7,1
Testing gas pressure, MPa 14,72,5
Number of outlets to a consumer 2
Outlet pressure to every outlet, MPa 3,2-6,2;0,4;0,4;0,4
Accuracy of gas pressure maintenance at the outlet, % ±5

 

 

 

Gas flow to every outlet

Q f1 max, Nm³/h 18000
Q f1 min, Nm³/h 8685
Q f1 min, Nm³/h 880
Q g2 min, Nm³/h 670
Q b3 max, Nm³/h 164
Q b3 min, Nm³/h 50
Q sc4 max, Nm³/h 80
Q sc4 min, Nm³/h 45
Q p5 max, Nm³/h 50
Q p5 min, Nm³/h 25
Ambient temperature, 0С -29...+49
Gas temperature at the inlet, 0С +8,1...+29
Number of gas purification degrees 2
Design service life to a total overhaul, not less, h 175200
Main voltage, V 220
Emergency voltage, V 220
Allowable magnitude at the site, on Richter scale 7

Overall dimensions (length×width×height), m:

− gas purification and metering unit
− gas heating, reduction and metering unit
− automatic gas odorization unit;
– heat transfer fluid treatment unit
– gas preheating unit
− heat transfer fluid tank
− odorant storage and discharge tank
− pulsed gas tank

 

10,0×3,0×3,0
9,0×3,0×3,0
1,6×1,0×2,8
8,0×3,0×3,08
3,0×2,0×3,0
2,0×1,1×2,137
5,85×0,845×2,37
4,59×1,19×1,75

Weight, kg, not more:

− gas purification and metering unit
− gas heating, reduction and metering unit
− automatic gas odorization unit;
– heat transfer fluid treatment unit
– gas preheating unit
− heat transfer fluid tank
− odorant storage and discharge tank
− pulsed gas tank

 

16000
16000
1500
14000
2000
436
1900
2680

Запросить стоимость

Политика конфиденциальности

Метизы АО «Газаппарат». Мы производим всё, что вам требуется.
Вся продукция изготавливается из высококачественных материалов!