Gauze Filters

Фильтры сетчатые для очистки газа

 

Application

Gas gauze filters, FS type are designed to clean non-aggressive hydrocarbon gases and air from mechanical impurities (scales, dust) that erode sealing surfaces of pressure regulator valves, safety shut-off valves, insulation valves and other fittings that as well clog and put impulse communications and devices out of operation.

Gas gauze filters are installed in the equipment of gas distribution systems with maximum working pressure up to 12 kgf/cm².

Structure of the filter

The filter consists of a welded body, a cover and a gauze element. Gas passing through the gauze of the gauze element is cleaned from solid particles that settle in the lower part of the bowl of the gauze element and the cover. Passing the gauze element, the purified gas enters the filter outlet. There are thread connections on the filter body for the differential pressure gauge connection. Upon the customer's request, the filter can be supplied together with a differential pressure indicator that helps to control the clogging degree of the gauze element. Replacement of the gauze element is carried out without dismantling the filter housing from a gas pipeline. Gas gauze filters are manufactured with the following nominal diameters: DN25, DN50, DN80, DN100, DN150 with welded bodies.

Purification degree of the filters is 80 µm.

Gas gauze filters, FS type are produced in accordance with the requirements of a specification.

Materials and purchased products used for the gas filter manufacture have all necessary certificates, passports and other documents confirming their compliance with current standards and specifications.

The manufacturer will guarantee that the filter meets the requirements of technical conditions if the consumer observes the conditions of transportation, storage, installation and operation.

A guarantee period of operation is 12 months of the date of sale to the consumer but not more than 18 months of the date of manufacture.

The guarantee period does not cover the gauze element.

 

 

 

Specification

Name

Values for every type of the filter

FS-25

FS-50 FS-50т FS-80 FS-80у FS-100 FS- 100у FS-150 FS- 150А FS-200 FS-200А FS-250 FS-250А FS-300 FS-300А FS-400 FS-400А FS-500

Nominal diameter DN, mm

Inlet

25

50

50

80

80

100

100

150

150

200

200

250

250  300 300 400 400 500

Outlet

25

50

50

80

80

100

100

150

150

200

200

250

250  300 300 400 400 500 

Nominal pressure PN, MPa (kgf/cm2)

1,6 (16)

Maximum inlet pressure, MPa (kgf/cm2)

1,2 (12)

Throughout capacity at inlet pressure Pin.=0.1 MPa, Nm3/h, not less

85

 350

350

900

900

1400

1400

3000

3000

5400

5400

8400

8400 12000  12000  21500  21500  33500 

Maximum pressure difference at the gauze element, kPa (kgf/cm2), not more

5 (0,05)

Type of connection Flange (GOST 33259-2015)
Construction length, mm 300 300 150 550 230 550 248 585 1000 524 1000 588 1400 586 1400 956 1800 1676

Overall dimensions, mm

- length
- width
- height

 

300
215
348

 

300
215
348

 

283
283
496

 

550
335
486

 

371
371
566

 

550
330
529

 

450
450
655

 

585
460
694

 

1060
460
515

 

640
479
1374

 

1064
460
515

 

718
531
1510

 

1466
580
581

 

718
531
1510

 

1468
580
581

 

1106
710
2264

 

1880
710
770

 

1860
1800
2660

Weight, kg, not more 50 50 50 80 80 100 100 150 200 210 220 320 400 350 434 680 670 3200
Structure of the body сварной
Purification degree, µm ** 80

 

Notes: 1. * Tolerance level of linear dimensions is ± 2 mm;
2. ** The “t” suffix is a degree of fine cleaning (not more than 5 µm);
3. The “u” suffix is for an angled type
4. The “A” suffix is for an axial type

 

Запросить стоимость

Политика конфиденциальности

Метизы АО «Газаппарат». Мы производим всё, что вам требуется.
Вся продукция изготавливается из высококачественных материалов!