Tel/fax.: +7 (7112) 51-36-88, 50-79-09, +7 771 014 92 92
E-mail: info@agrs.kz
Application
Goluboye Plamya 001-1/73-100/04-N1 Fuel pulse gas treatment unit (FPGTU) is designed:
− to purify natural and associated petroleum gas from mechanical impurities and condensed moisture;
− to heat gas and keep temperature at the outlet not less a minimum allowable temperature;
− to decrease high gas pressure to a required сlow pressure and its maintenance with a specified accuracy;
− to measure gad flow rate;
− to odorize gas before its supply to a consumer.
Basic technical data and parameters:
FPGTU is a modular equipment with technical devices located inside. FPGTU consists of:
– processing, coolant heating and odorization compartments;
– a container for odorant (mixture of natural mercaptans) transportation;
− a fore-roof metal structure for mercaptans container;
− pipeline elements for units connection.
Parameter |
Value |
Maximum gas working pressure at the inlet, MPa |
9,81 |
Minimum gas working pressure at the inlet, MPa |
7,34 |
Tested gas pressure, MPa |
14,72 |
Output gas pressure in both outputs, MPa |
0,40 |
Maximum total gas flow rate for both outlets, Nm3 /h |
201,9 |
Minimum total gas flow rate for both outlets, Nm3 |
54,0 |
Maximum flow rate to a power unit, Nm3 /h |
96,3 |
Minimum flow rate to a power unit, Nm3 /h |
54,0 |
Maximum flow rate to a boiler house, Nm3 /h |
105,6 |
Maximum flow rate to a boiler house, Nm3 /h |
0,0 |
Input gas pressure, °С |
from +19.1 to +29 |
Minimum gas temperature at the output, °С |
+5 |
Ambient temperature, °С |
from -29 to +49 |
Purification degree (maximum allowable sizes of solids at the output from FPGTU), µm |
5 |
Design service life before overhaul, not less than, h |
175200 |
Main power supply, V |
220 |
Emergency voltage supply, V |
220 |
Number of outlets to consumers |
two |
Allowable seismicity of the area for station installation, magnitude on the Richter scale |
8 |
Overall dimensions (length×width×height), not more, m (see Appendix А): - processing unit - a container for odorant transportation V=1.8 m³, ∅1,22 fore-roof metal structures above the container for odorant transportation - pipeline elements for connection of the units |
9,0×2,8×3,0 2,5х1,25х1,805 3,5х2,4х2,425 - |
Weight, not more, kg - process unit - a container for odorant transportation V=1.8 m³ - fore-roof metal structures above the container for odorant transportation - pipeline elements for connection of the units |
11000 1500 700 200 |