Fuel pulse gas treatment unit (FPGTU)

Блок подготовки топливного и импульсного газа БПТИГ

Application

Goluboye Plamya 001-1/73-100/04-N1 Fuel pulse gas treatment unit (FPGTU) is designed:

− to purify natural and associated petroleum gas from mechanical impurities and condensed moisture;

− to heat gas and keep temperature at the outlet not less a minimum allowable temperature;

− to decrease high gas pressure to a required сlow pressure and its maintenance with a specified accuracy;

− to measure gad flow rate;

− to odorize gas before its supply to a consumer.

Basic technical data and parameters:

FPGTU is a modular equipment with technical devices located inside. FPGTU consists of:

– processing, coolant heating and odorization compartments;

– a container for odorant (mixture of natural mercaptans) transportation;

− a fore-roof metal structure for mercaptans container;

− pipeline elements for units connection.

Parameter

Value

Maximum gas working pressure at the inlet, MPa

9,81

Minimum gas working pressure at the inlet, MPa

7,34

Tested gas pressure, MPa

14,72

Output gas pressure in both outputs, MPa

0,40

Maximum total gas flow rate for both outlets, Nm3 /h

201,9

Minimum total gas flow rate for both outlets, Nm3

54,0

Maximum flow rate to a power unit, Nm3 /h

96,3

Minimum flow rate to a power unit, Nm3 /h

54,0

Maximum flow rate to a boiler house, Nm3 /h

105,6

Maximum flow rate to a boiler house, Nm3 /h

0,0

Input gas pressure, °С

from +19.1

to +29

Minimum gas temperature at the output, °С

+5

Ambient temperature, °С

from -29

to +49

Purification degree (maximum allowable sizes of solids at the output from FPGTU), µm

5

Design service life before overhaul, not less than, h

175200

Main power supply, V

220

Emergency voltage supply, V

220

Number of outlets to consumers

two

Allowable seismicity of the area for station installation, magnitude on the Richter scale

8

Overall dimensions (length×width×height), not more, m (see Appendix А):

- processing unit

- a container for odorant transportation V=1.8 m³, ∅1,22

fore-roof metal structures above the container for odorant transportation

- pipeline elements for connection of the units

 

9,0×2,8×3,0

2,5х1,25х1,805

3,5х2,4х2,425

-

Weight, not more, kg

- process unit

- a container for odorant transportation V=1.8 m³

- fore-roof metal structures above the container for odorant transportation

- pipeline elements for connection of the units

 

11000

1500

700

200

Service life, year, not less

30


Запросить стоимость

Политика конфиденциальности